Marmorino is a mineral decorative coating natural lime-based, antique marble-looking, interior decorative coating material. Veneto Marmorino creates finishes that evoke the elegant and functional appearance of marble, giving natural textures with more or less evident color nuances, depending on the process, and a compact and very resistant appearance that is smooth, opaque, and soft to the touch.
Veneto Marmorino is thoroughly mixed with a spatula without being diluted pre-application. Then it is applied to the surface with a steel trowel as the first layer. Depending on the ambient temperature, the second layer can be applied after 6-8 hours. The second layer should be applied with a thickness appropriate for the desired texture and pattern. Distribute the product with a steel trowel as a second layer, homogeneously pressing it in various directions.
Wetness on the surface will slowly tarnish after the products start to such depending on the ambient temperature, it is applied in the meanwhile with a trace of materials being pressed on the surface in various directions with the trowel, and the product is compressed until the surface gets completely homogenous. Consequently, the product is polished with a clean steel trowel and the brightening process is moved on. The longer the product is polished with a trowel until it dries, the brighter it will be. Since the product is based on natural lime, the product color will brighten up 4 to 5 shades after complete drying.
The odor may be released in places where it is humid and the temperature is high due to natural lime. Therefore, it is recommended in such environments that Veneto Shield (matt or bright) be applied on Marmorino. During the application and for 24 hours post-application, it should be paid attention that the ambient temperature is a min. +5 °C and a max. of +35 °C
Allow 2 hours at touch 6-8 hours for complete dry at 23°C environment conditions.
Depending on surface smoothness, porosity, and application: 0,9-1,3 kg/m2.
Based on 2 coats on smooth surfaces featuring average absorption. It is advisable to determine the actual spreading rate by performing a pre-test on the specific surface.
Clean all kinds of fragile coatings to the durable base of the surface, also from dust, oil, grease, and other dirt. Previously coated surfaces: clean the surface thoroughly from old loose coatings and from different dirties. Insignificant defects of the mineral surface shall be corrected with finishing plaster Veneto water-based pigment concentrate and then polish. It is recommended to treat the surface with an antiseptic solution in mineral surfaces for protection against fungi and mold.
